Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers
(9 reviews)
Price: $219.97
In Stock
Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers
Retail:$266.66
Our Price: $219.97
You Save: $46.69
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meCustomers prefer these similar products
1% prefer this
- All Info
- Reviews (9)
- Q & A (0)
- Photos
Pop and Lock Accessories and Parts
- Tonneau Cover
- Locks
- Pop and Lock
Install a power locking handle for a truck cap or hard tonneau cover. The lock wires into your vehicle's existing power door locks, so when you lock your truck, you lock your cap or tonneau too. Keys are included to manually unlock the handle.
Features:
- Powered handle lets you lock and unlock your truck cap or hard tonneau cover with the push of a button
- Replaces your existing rotary handle
- Ties into truck's power locks so that when you lock your truck, you lock your tonneau
- 2-Piece wire design for easy removal of truck cap or tonneau cover
- Quick disconnects let you unplug tonneau/truck cap harness from truck harness
- 2 Keys included for manual operation of lock
- Rustproof, stainless steel e-clip lets you quickly, easily mount handle
- System hardwires into your vehicle's power door locks
- In-line fuse protects your truck's wiring from overloads
- Hardware and wiring included
Specs:
- Application: truck caps or fiberglass tonneau covers on vehicles with power door locks
- Truck cap must have a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch
- Tonneau cover must have a 1-1/8" center hole for a rotary latch
- 1-Year warranty
Power Lock for Truck Cap or Tonneau
Add the convenience of a power lock to your truck cap or hard tonneau cover. This kit taps into your truck's existing power lock system, so you can lock and unlock your tonneau or topper using your vehicle's key fob or the in-cab control buttons. Lock your truck doors, and your cap or tonneau will lock at the same time.
Keyed Replacement Handle
This replacement handle has a keyed lock so that you can also unlock your truck cap or tonneau cover manually. Two keys are included. The handle's swing-open cover has a spring return to ensure that the lock remains covered, thus helping to keep dirt and debris out of the cylinder.
2-Piece Wiring Harness with Fuse
To install this lock, run the wiring from your tonneau or truck cap to the front driver's-side kick panel where you will find the wiring for your vehicle's power door locks. The included instruction sheet has a vehicle-specific guide that explains how to locate the correct wires for your application. This may require a circuit tester (sold separately).
The provided wiring harness connects to your vehicle's wiring with the included quick-splice connectors. An in-line fuse is supplied to protect your truck's wiring from overload.
The 2-piece design of the harness allows you to disconnect the wiring quickly and easily in case you need to remove your topper or tonneau. Just unplug the wires at the middle connection point and you can remove your truck cap or cover without having to remove or re-run wiring. Then just plug the harnesses back into one another when you reinstall your tonneau or cap.
PL9555 Pop and Lock Power Handle for Truck Caps and Hardshell Tonneau Covers - Load N Lock
Item # PAL9555
California residents: click here
Customer Satisfaction Score:
80% were satisfied with this product
20% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers - PAL9555
Average Customer Rating: 5.0 out of 5 stars (9 Customer Reviews)
Install a power locking handle for a truck cap or hard tonneau cover. The lock wires into your vehicle's existing power door locks, so when you lock your truck, you lock your cap or tonneau too. Keys are included to manually unlock the handle.by: Eric T03/13/2023
Great add to my Truck Camper. Works great and was relatively easy to install. Hardest part was finding the right wire to trigger the lock mechanism but that wasn't too bad.
by: Terri06/20/2022
My husband had some difficulty locating one of the wires, but after successfully completing installation of the Pop & Lock power locking handle, he is very happy with the convenience and security this addition provides for access to the cap.
by: Jeff07/18/2018
The lock works great and is very convenient. I should have done this years ago. Getting into the driver's door for the solenoid wiring was fairly easy after finding a good online video.
by: Glen 03/28/2021
worked great, difficult install (finding the right wires) but sure made it nice to unlock/lock doors and camper with fob
by: Ronald 03/17/2021
Money well spent,locks with the doors.
by: Anthony02/05/2019
Everything came as described. Very easy to install.
by: Wayne 07/01/2021
This item works great.
by: Benjamin04/10/2019
She was the best
by: Ryan 12/12/2021
9
9
See what our Experts say about this Pop and Lock Accessories and Parts
- Differences Between Pop & Lock Power Lock Conversion Kit PAL9772 and PAL9555 You are correct, the difference between the two Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers kits part # PAL9772 and part # PAL9555 is one comes with a locking handle (PAL9555) and the other allows you to use your existing handle (PAL9772). The advantage of PAL9555 is it comes with the locking handle that can be unlocked manually with the included keys if you want that option. If you use the PAL9772 your existing handle will not be capable of unlocking manually....
view full answer... - Remote Lock for the Leer 100XQ Truck CapYes, the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers part # PAL9772 or part # PAL9555 will work on the Leer 100XQ Truck Caps because it uses a cable latching mechanism and the handle is not riveted on.
view full answer...
- Are the Pop & Lock Kits # PAL9555 and # PAL9772 Compatible with A.R.E. Topper on 2017 Ram 1500Yes, both the Pop & Lock Power Locking Handle # PAL9555 and the Pop & Lock Power Lock Conversion Kit # PAL9772 are compatible with the MX Series A.R.E. Topper on your 2017 Ram 1500 as long as your truck cap has a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch These will tie into your power locks and allow you to activate the lock with the remote for your Ram. The difference between these two lock systems is that part # PAL9555 comes with a lock that can be...
view full answer... - Correct Pop & Lock for Leer 180XL Truck Bed CamperThe Leer 180XL Truck Bed Camper uses a cable locking system as opposed to a rod locking system from what I was able to research so the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part # PAL9555 should work great. Please note, Pop & Lock does not provide specific testing on truck bed campers and tonneau covers.
view full answer... - Is Pop & Lock Power Locking Handle Compatible With A.R.E. V-Series Truck CapThe Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 should be compatible with the A.R.E. V-Series topper on your 2017 Chevy Colorado. It is the right type of frameless glass door with a lock, though the only thing you need to ensure is that your T-handle goes into a 1-1/8" center hole as this is not information we have. It is very likely, though I highly recommend finding out to be sure.
view full answer... - Will Pop & Lock Power Lock Conversion Kit Fit Truck Cap on 2022 Ram 1500The Pop & Lock # PAL9772 will work as long as you have a 1-1/8" center hole for a rotary latch and a cable-latch assembly. If you're talking about a glass door then it must have a frameless, bonded glass door. If you do not have a cable-latch assembly then you will need the Pop & Lock Power Locking Handle # PAL9555 instead which replaces the entire handle.
view full answer... - Pop and Lock Power Lock Conversion Kit that Fits Leer 100 TonneauYes, the Pop and Lock Power Lock Conversion Kit # PAL9772 that you referenced has been confirmed as a fit for your Leer 100 tonneau. This is the same as the Pop and Lock PL9772 that you referenced as well. You will not need the part # PAL9555 as well either.
view full answer... - Lock Kit Recommendatoin for 2017 Chevy Silverado 1500 that Ties into Power LocksFor a topper lock that ties into the power lock system of a truck we have the part # PAL9555 which would work well on your hard tonneau cover that you have installed on your 2017 Chevy Silverado 1500.
view full answer... - Is Pop and Lock Light Kit part # PAL9135 Compatible with PAL9555 The reason the Pop and Lock light kit part # PAL9135 is recommended with the # PAL9000 is because the # PAL9000 comes with key fobs that have light buttons integrated into them. That said, since the # PAL9555 does use a 12 volt power source it could be used with the # PAL9135 but there wouldn't be a key fob setup.
view full answer... - Is The Pop And Lock Power Locking Handle Compatible With A.R.E. V-Series Truck Caps?As long as the A.R.E. V series truck cap on your 2018 Ram 1500 has a frameless, bonded glass door on the back with a 1-1/8" center hole for a rotary latch, then the Pop & Lock Power Locking Handle # PAL9555 will work. Unfortunately, I do not have any information or resources to determine if the cap you are ordering has the 1-1/8" hole or not. I would try contacting the manufacturer to verify. I attached a photo to show what a compatible truck cap looks like.
view full answer...
- What Wires To Splice Into For Pop & Lock Power Locking Handle for Truck Caps On 2019 GMC SierraThe correct lock and unlock wires to splice into on a 2016-2019 GMC Sierra to install the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part # PAL9555 should be a tan with a yellow stripe and grey. That said, it is always best to test with a circuit tester before splicing.
view full answer... - Recommended Pop & Lock Locking Handle for ARE Truck CapAs long as your 2016 Ram 1500 has power door locks and your ARE truck cap has a frame-less, bonded glass door with a 1-1/8" center hole for a rotary latch you can use the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555. This kit will install onto your ARE cap and allow it to be locked and unlocked in the same manner as your power door locks do. This kit also comes with 2 keys to allow for manual locking and unlocking of the truck cap, so it's a great option...
view full answer...
- Pop & Lock Power Locking Handle for Lakeland Topper With 2 HandlesThe Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 will work with your Lakeland topper. This replaces the existing handle and ties into your power locks on your truck. Since you have two handles you would need two of these assuming you want both to lock.
view full answer... - Wiring Colors and Location for Pop and Lock Camper Lock PAL9555 for 2017 Ram 1500The wires you need to locate to install the Pop and Lock tailgate lock part # PAL9555 are in the driver side kick panel. The colors are Orange/Gray or Tan/Green for lock and Lime Green or Tan/White for unlock.
view full answer... - Availability of Lock Mechanism and Keys For Pop & Lock Power Locking Handle # PAL9555 We do have the Replacement Handle # PAL9585 out of the Pop & Lock Power Locking Handle # PAL9555. The replacement will still include some of the cables but it does not include all the wiring. This is the only other way we carry the lock and keys similar to this lock. If you do not believe this will work please reply back with additional information and any images to help determine if we have another option which may work for your situation.
view full answer... - What Color Wire is Unlock Wire of 2020 Ram 1500 for Pop and Lock InstallOn your 2020 Ram 1500 the unlock wire should be lime green or tan/white. You should use a circuit tester like part # PTW2993 to verify this.
view full answer... - Does Pop & Lock Power Lock Conversion Kit Replace Handle on LEER Cap for 2018 Ford F-150The Pop & Lock Power Lock Conversion Kit # PAL9772 will not replace the handle that you current have on your 2018 Ford F-150 LEER cap. It simply wires into your current lock wiring and allows you to lock/unlock your cap with your key fob. If you would like to replace your handle as well then you can use the kit # PAL9555 instead.
view full answer... - Pop & Lock Power Lock Option For Leer 100XL Truck CapThe conversion kit you are talking about would be the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers # PAL9772. I checked with Pop and Lock though, and according to them the # PAL9772 is for 2011 and up model year Leer 100XL truck caps. So it may not work with the handle on an '06, but there is another option, so long as your Leer has a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch, which is the complete kit, the Pop & Lock Power...
view full answer... - Can a Power Lock be Installed in a Leer XQ Camper Shell on a 2016 Toyota TacomaFor Pop & Lock Power Lock Conversion Kit # PAL9772 or # PAL9555 to work your Leer camper shell must have a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch. The difference between these kits is that # PAL9555 comes with a latch than can be unlocked/locked manually. Check to see if your Leer camper shell meets the above criteria to determine if either kit will fit.
view full answer... - Replacement BOLT Lock for ARE Camper Shell on 2016 Ford F-250I believe you are referring to something like the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 which adds a power lock to the ARE camper shell on your 2016 Ford F-250. The only other thing that you might be talking about is the Replacement Lock Cylinder for BOLT Toolbox Latch # BL692917 which you would install using the Retaining Nut # BL4306752. We actually had someone use this for an ARE camper so this could also work for your application.
view full answer... - Pop & Lock System that Allows Use of Trucks Key Fob for Undercover LUX Tonneau CoverThe Pop & Lock Remote Keyless Entry Kit part # PAL9000 is compatible with your Undercover LUX ABS composite hard tonneau cover. The Pop & Lock keyless entry part # PAL9000 kit comes with it's own key fob so you are not able to lock or unlock the cover with your Colorado's key fob. You are not able to use the truck's key fob because this particular Pop & Lock kit does not wire into your vehicle's power lock system. The kit replaces the latches of the Tonneau cover to allow the cover to open...
view full answer... - Where To Install Truck Harness For Pop & Lock Power Locking Handle On A 2014 Ford F-150The truck harness for the Pop & Lock Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 is installed at the driver side kick panel on your 2014 Ford F-150, or above the steering column if you have a crew cab, and if you do not have a crew cab, it will be at the driver side sill plate. The gray/brown wire will be the "lock" wire, and the light blue/light green or purple/gray will be the "unlock" wire if you have the non crew cab. And if you have the crew cab,...
view full answer... - Could Pop & Lock Handle # PAL9555 Fit a Leer 100R CapHey Erik, so we checked with Pop & Lock, and while they did not say whether the Power Locking Handle # PAL9555 could fit a Leer 100R cap, they did provide information about the requirements you need on your cap. Firstly, your truck must be already equipped with power locks. Secondly, you need to confirm whether your Leer 100R has a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch. If you have these requirements, then the # PAL9555 will work perfectly. Since you...
view full answer... - Can You Use Tailgate Handle Lock/Unlock Wires for Pop & Lock Power Locking Handle for Truck CapsYes, you can splice into the tailgate handle lock/unlock wires if equipped when installing the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part # PAL9555. The provided instructions are used when there is no locking tailgate handle which is more common. That said, there are no charts for the wire colors of the tailgate handle lock/unlock so you will need to figure this out yourself by testing the wires with a circuit tester. You may also need to figure out a way...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Tricia G
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Eric T.
3/14/2024
No issues with the lock after a year.